Posted on 4 Comments

HOW TO SEW BIAS BINDING

Bias binding is such a useful technique and it’s not difficult to master, like everything a little practise makes perfect. Bias binding is a great way to finish the raw edge of a garment. It is hugely versatile and can be used on necklines, armholes, hems, pretty much anywhere really. You can buy ready made binding from your local haberdashery shop. I like to make my own and use up some of those scraps!

There are really two types of binding for our purposes:

DOUBLE BIAS BINDING

Will show on the right side of the garment. It can be decorative if made in a contrasting fabric.

SINGLE BIAS BINDING

It can be used in lieu of a facing on an armhole or neckline. Apart from a row of topstitching, only be seen on the inside.

In this tutorial I’ll show you how to attach your bias binding tape. If you want to know how to cut, join, press and sew bias binding, go check out my BIG BIAS BINDING TUTORIAL.

How To sew Double Bias Binding

Double bias binding is used when you want to see it on the right side of a garment. It is both decorative and practical. YAY, One of my favourite combo’s!

Maven Patterns Bias binding tutorial 01

Take your prepared binding and pin RIGHT side of binding to the RIGHT side of garment. Align the raw edges together. Machine stitch along the fold.

TIP: if you are binding a thicker fabric or a few layers of fabric, take a smaller seam allowance so you have extra binding where you need it to help accommodate that extra bulkiness.

Maven Patterns Bias binding tutorial 02

Press binding AWAY from the garment.

Maven Patterns Bias binding tutorial 03

Wrap binding over to the raw edge to WRONG side of garment. Position the folded edge of binding so your machine stitching is covered by a few millimetres. Pin to hold. Tack right on the edge of the binding to hold into place. Ensure you catch all the binding on the reverse side and just cover the machine stitch. Keep an even distance away from the binding on the front. Take your time to get this right now, the tack line will be a guide to your topstitching!

Maven Patterns Bias binding tutorial 04

TWO OPTIONS TO FINISH:

OPTION 1: EDGE STITCH ON THE BINDING

Maven Patterns Bias binding tutorial 07
Maven Patterns Bias binding tutorial 06

Top stitch the binding to finish

With the right side of your garment facing you, edge stitch the binding. As long as you stitch to the inside of your tacking stitch, you know you’ve caught the back of the binding!

OPTION 2: If you don’t want your stitching to show on your binding try this method…

Finish your binding by Stitching in the Ditch (also known as sink stitch).

‘Stitch in the Ditch’ is a really useful technique to know, good for finishing waistbands as well as bindings. When stitched in the same colour as your main fabric the stitch line practically disappears as it settles into the seam.

Maven Patterns Bias binding tutorial 11
Maven Patterns Bias binding tutorial 012

Position your machine needle in line with the groove (the ditch) of the seam, you are going to stitch right in that ditch, NEXT to the binding but not on it. And as long as you stitch to the inside of your tacking thread, you know you’ve caught your binding on the back 🙂

Just remove your tacking thread, and you’re done!

And another way to attach binding!

an alternative way to finish a raw edge

There is yet another way to attach bias binding to finish a raw edge!

This way was shared with me by Shelley, one of my lovely testers of the new Maven1832 patterns. Shelley was making the French dart with the bishop sleeve in a slippery fabric and found this was an easier way to attach the binding at the cuff.

It’s pretty similar to the above methods, except you attach to the wrong side of the fabric and flip binding to the right side of the fabric and stitch. This method only works with visible edgestitching but you might find it less fiddly if you are working with a tricky or slippery fabric.

It’s really a personal preference which way you prefer to sew your binding, but it’s always good to have more than one way to stitch something. Different fabrics do sometimes require a different method!

METHOD

Place the right side of binding to the wrong side of fabric and stitch in the fold to attach.

Fold binding over to the Right Side so all the raw edges are enclosed and the stitch line is covered. You can trim the seam allowance down a smidge if the biding doesn’t quite cover the stitch line.

And then, with the Right Side Up facing up, edgestitch the binding in place.

How To Sew Single Bias Binding

Single bias binding is used to finish a raw edge without it showing to the front of your garment, a great choice if you want a fuss free finish without a facing.

This isn’t everybody’s method, but this is the method I was taught by a sample machinist I worked with about 20 years ago, she called it the Cheat Method. I liked the method because it was quick and that binding NEVER frayed no matter how much I washed those garments (baby and kids clothes), must have been the combination of a folded edge and the extra understitching – great for linen fabrics.  I’ve used this many times over the years instead of a having a flappy facing. The only drawback is some fabrics are just too bulky, but just bind anything too thick with a contrasting fabric and make a feature of the inside!

MAVEN PATTERNS SINGLE BINDING TUTORIAL 01

PRESS: Fold your binding in half and press.

Version 2

ATTACH: Line up the raw edges of your binding with the raw edge of your garment, with right sides together.

DSC_0326
DSC_0335

Stitch with a 6mm seam allowance to attach.Press binding and seam allowances away from garment. Understitch (machine stitch an edge stitch through all the layers on the binding close to the seam.) The understitching is an optional step, there won’t be a disaster without it, but it does make the binding roll to the wrong side better and I think it makes the binding stronger.

Version 2

Tack along the edge of the binding to hold in place, this will also give you a guide line for your next row of stitching.

MAVEN PATTERNS SINGLE BINDING

Flip your garment over and topstitch with the right side up. If you stitch inside your tacking line so you know that you will catch all the binding!

(You can make narrower binding if you prefer…simple bit of maths… finished width of binding + seam allowance, x 2 = cutting width of binding.)

And that is how to sew bias binding!