| How to make patch pockets perfectly EVERY time! |
One of the tricks I learnt after first leaving college (when I was still just a lowly Design Room assistant) was how to make patch pockets perfectly EVERY time – even when they have curved bottoms! I worked with some great sample machinists, who showed me this little trick. Of course, they let me do it wrong a few times before revealing the easiest way in the world.
If you have downloaded The Maria Wrap Apron PDF pattern, or the as-yet-soon-to-be-released Wendy Artisan Smock Pattern (exciting…more to be revealed later!) you will already have seen the pattern piece labelled POCKET FORMER with the instruction to cut in card only – this is the same shape as your patch pocket pattern piece but WITHOUT THE SEAM ALLOWANCE and ladies that is the trick – just press your pocket AROUND a piece of card cut to the correct shape!
If you are using a pattern from another designer and don’t have a pocket former pattern piece – fear not! Just trace off your patch pocket pattern piece (or print an extra – oh, the joys of PDF patterns) and cut off ALL the seam allowances to follow along, but do remember to keep the original pocket pattern.
A MRS MAVEN TOP TIP: This is the same method that I used to ‘card’ my design patterns ready to send off to the factories for mass production. So feel free to card the whole pattern if it’s one you use a lot, it’ll last forever!!
If you are looking for a little help to make and stitch your pockets on The Maria Apron or The Wendy Smock, we have another patch pocket tutorial here.
To make a pocket former template in card you will need:
- One patch pocket FORMER pattern piece (or a pattern WITHOUT seam allowances)
- A piece of card bigger than the pattern piece, a cereal box is good.
- Stapler ( and a stapler extractor is useful)
- Ruler, paper scissors and pencil
Place together, make sure the folded edges of both are aligning or your card template will be the wrong size later! Staple to hold in place.
Use the ruler and trace around the outside edge, taking care that you make a right angle at that centre fold line or you’ll get an odd pointy shape in the centre when you cut out the template.Cut out carefully. Because you are cutting it out while folded you know both side are going to be symmetrical.
Un-staple and remember to write which pattern it belongs to!
So now what do you do with it?
Lay your card pocket former template on your pocket and press the seam allowance all the way around. You’ll get a smooth matching curve on EVERY pocket you make.
Oh Look they match…how delightful!! Now all you need to do is stitch them on!
Need a little help bagging out your pocket corner, or doing the reinforcement stitch? Check out our other PATCH POCKET TUTORIAL here.
Mrs M x